Orion 5-Position 1.25-inch Filter Wheel
|The Orion 5 position manual filter wheel allows you to quickly select a 1.25" filter. |
The Orion 5-Position 1.25” Filter Wheel is a wonderfully efficient way to dial-in the telescope filter you want to use for observing or astrophotography. With the affordable 5-Position Filter Wheel, you can change filters without removing your telescope eyepiece or astrophotography camera. Just rotate the wheel with light finger pressure and the selected filter clicks into place. Presto!
Planetary observers can switch among several color eyepiece filters with the 5-Position Filter Wheel in order to get the most detail out of observations of our solar system neighbors through a telescope. Deep-sky object aficionados can compare views in "A/B" fashion through broadband and narrowband filters, or use the filter wheel to enhance views using O-III or H-beta filters.
Astrophotographers can use the 5-Position 1.25” Filter Wheel to shoot sequentially and without interruption through the different telescope filters required for tri-color, RGB and LRGB imaging - all "locked and loaded" in prominently numbered threaded wells.
Holds up to five Orion 1.25" eyepiece and/or imaging filters, or you can leave one position empty for an unfiltered viewing comparison. The rugged anodized aluminum and composite rubber housing protects installed filters from dirt, moisture, and impact better than sliding filter tray designs. Keep your five favorite filters installed to keep them clean and ready for action!
The Orion 5-Position 1.25-inch Filter Wheel attaches directly to a telescope via a removable 1.25" nosepiece or T-thread. It accepts 1.25" telescope eyepieces, accessories or camera barrels (nosepieces).
Requires additional 20mm focus travel.